CEMENTING & GROUTING

AMC BOS FIX™

AMC BOS FIX™ is designed specifically to be used in conjunction with the AMC BOS UNIT™ as a preventative maintenance system to minimize borehole torque and fluid losses, while also maximising borehole stabilisation, penetration rates, core recovery and overall productivity.

CLAY & SHALE STABILIZER

AMC CR 650™

#AMC CR 650™ is a high molecular weight, powdered polymer which has been developed to improve cuttings encapsulation as well as helping to stabilise the formation. AMC CR 650™ forms a protective polymer film on the… 

Read More

 drill pipe and bit as well as on the walls of the bore hole which helps to provide lubrication when drilling in troublesome formations. It is ideally suited for use in horizontal directional drilling, water well, mining and tunnelling applications.

CLAY & SHALE STABILIZER

AMC COREWELL™

AMC COREWELL™ is a sophisticated, multifunctional single sack system created especially for diamond coring and slim-hole drilling activities. AMC COREWELL™ provides superior core protection and side wall stabilisation. AMC… 

Read More

COREWELL™ helps secure a native state, preserved sample allowing for more reliable core analysis data which ultimately leads to more accurate resource evaluations. AMC COREWELL™ employs physical mechanisms that entrap unconsolidated soils and cuttings to prevent dispersion.

FLOCCULANT & DISPERSANTS

AMC FLOC DD™

AMC FLOC DD™ is a specially formulated flocculants designed specifically to promote settlement of fine to colloidal sized drill cuttings in non-dispersed, polymer and low-solids water-based drilling fluid systems. The cationic charge found in… 

Read More

AMC FLOC DD™ neutralises the surface charges and also attaches to particles causing them to aggregate and form flocs, the flocs then settle quickly when entering the surface pits.

FOAMING AGENTS & DETERGENTS

AMC SUPERFOAM™

AMC SUPERFOAM™ is a biodegradable mixture of anionic surfactants which has been formulated for use in the mineral and water well drilling industries.

FOAMING AGENTS & DETERGENTS

AMC TRUCK WASH™

AMC TRUCK WASH™ is a high foaming degreasing detergent which effectively removes dirt, oil, and grease from surfaces.

LOST CIRCULATION MATERIAL

AMC PLUG™

AMC PLUG™ is a polymer in granular form that absorbs up to 500 times its original volume in water. AMC PLUG™ is ideal for sealing zones of lost circulation and can also be used to reduce rod vibration in holes where lost returns are a problem.

LUBRICANTS AND CUTTING OIL

AMC SUPERLUBE™

AMC SUPERLUBE™ is a vegetable based oil which was developed specifically for the mineral exploration industry. Its extreme pressure lubrication properties were designed for the operating parameters at the bit face giving improved penetration rates and extended bit life.

LUBRICANTS AND CUTTING OIL

AMC THREAD GREASE CALCIUM™

AMC THREAD GREASE CALCIUM™ is a lithium calcium complex, heavy duty thread compound containing specialised polymers and proprietary additives. AMC THREAD GREASE CALCIUM™ is fortified with

Read More

 molybdenum to enhance extreme pressure lubricity and load carrying capacity. It is a consistent performer at high temperatures, has a low water wash value and prevents corrosion. AMC THREAD GREASE CALCIUM™ is designed to reduce galling and friction and protects the threads from damage, wear and seizing.

LUBRICANTS AND CUTTING OIL

AMC SUN SOAP™

AMC SUN SOAP™ has been developed to enable the core sample to enter and slide more easily into the inner tube promoting longer runs through fractured broken formations. AMC SUN SOAP™ will protect and improve the life of the inner tube, is water soluble and will not stain the core.

LUBRICANTS AND CUTTING OIL

AMC TORQUE GUARD™

AMC TORQUE GUARD™ is a distinctive, next generation, high performance extreme pressure lubricant utilising sophisticated technologies to improve the lubricating qualities of a drilling fluid through advanced adhesion and filming characteristics… 

Read More

AMC TORQUE GUARD™ is a high performance torque reducer specifically designed to provide friction reduction through enhanced lubricating characteristics of most water-based drilling fluid systems.

VISCOSIFIER

AMC EZEE PAC R™

AMC EZEE PAC R™ is a new generation, highly dispersive high quality polyanionic cellulose polymer used for viscosity and water loss control in most water based drilling fluid systems. AMC EZEE PAC R™ will not fisheye and has been designed 

Read More

to disperse rapidly into any make up water even under the poorest conditions. The mixing efficiencies of AMC EZEE PAC R™ reduces wastage and promotes lower mud costs and total hole costs.

VISCOSIFIER

AMC LIQUI POL™

AMC LIQUI POL™ is a rapid yielding, high molecular weight polymer in liquid form that provides viscosity without the problems associated with mixing powdered polymers. AMC LIQUI POL™ will help…

Read More

improve core recovery, particularly in clays and shales and highly fractured formations. It provides cuttings encapsulation as well as helping to stabilise the formation.

SPECIALTY PRODUCTS AND CHEMICALS

AMC BENTONITE PELLETS™

AMC BENTONITE PELLETS™ are a highly compressed pellet made from premium sodium bentonite. AMC BENTONITE PELLETS™ has the advantage of achieving greater depths due to the highly compressive nature of the pellet.